Please Select Currency:
Shop Online

US$1,790.00
excl GST

Power type required  EUR
 NZ/AUS
 UK
 US/CA
Qty

Bluelab Dosetronic® Solenoid Kit

For hobby or small scale growers

Optimise crop performance with consistent, accurate management of nutrient feeding by using the Bluelab Dosetronic Solenoid Kit - the simple solution for automatic feeding systems.

The Bluelab Dosetronic Solenoid Kit provides you with everything you need to set up an accurate, easy to manage, automated nutrient management system. The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.

bluelab-dosetronic-solenoid-kit.jpg

This kit has been specially designed for hobby or small scale growers and includes the Bluelab Dostronic Controller and Bluelab Dosetronic Solenoid Cable Pack.

For commercial or large scale growers please see our Bluelab Dosetronic Peridoser Kit.

How does the Bluelab Dosetronic Controller work?

bluelab-doestronic.jpg

The Dosetronic provides continuous control of the desired levels of nutrient and temperature.

All you do is program the required levels of conductivity, pH and temperature as the crop progresses through each growing phase. You retain control and the Dosetronic backs you up! This enables fast and accurate alterations to the feed system as the needs of the crop change.

The Dosetronic can be used for a wide range of applications including Hydroponics, Horticulture, Agriculture, Floriculture and Aquaculture and is ideally suited for re-circulating hydroponic NFT systems.

Automated and accurate nutrient control

The Bluelab Dosetronic Controller provides continuous control of conductivity, temperature and pH levels of a solution by adding fertiliser and pH corrector into your mixing tank via solenoids.

Simply program the Bluelab Dosetronic Controller with the conductivity, temperature and pH values that you want your system to run at and tailor the dosing intervals to suit the size of your mixing tank. The Dosetronic will then take care of the hard work for you.

By using high performance conductivity and pH probes, the Bluelab Dosetronic Controller will intelligently control the strength of your re-circulating solution to a high level of accuracy. When it detects that the conductivity or pH levels have fallen outside of your pre-programmed set points, the Bluelab Dosetronic Controller will automatically trigger the dosing of more nutrient or pH corrector until those levels have stabilised. The job of the Dosetronic does not stop there. It will tirelessly control your system 24 hours a day, 7 days a week, 12 months a year.

Solution or air temperature control

The innovative design of the Dosetronic means you can choose to control either the nutrient solution temperature, or the air temperature, depending on which is more critical to your growing environment.

All you do is select the heating or cooling equipment required to control the temperature of the air or solution, program in the temperature settings you require, and plug the equipment into the controller. You then place the temperature probe (supplied with the Dosetronic) where control is required.

The Dosetronic has proven itself in the hydroponic market worldwide for over 20 years and has earned itself an international reputation for excellence. This is why so many commercial growers are using the Bluelab Dosetronic to save time, money and improve accuracy.

It is one of the most simple, robust and reliable controllers in its class!

Solenoid dosing system
bluelab-solenoids-368.jpg

Three Bluelab Solenoids are supplied in this kit.

Each solenoid is supplied with a flow restrictor to reduce the flow rate for dosing into small tanks. This ensures each dose will not change the conductivity or pH by more than 0.1 EC or 0.1 pH, which avoids the risk of overdosing.

Each solenoid is able to dose up to 50ml/min if the flow restrictiors are removed.

The Bluelab Dostronic Solenoid Kit contains:

Suitable Applications
  • Hydroponics
  • Horticulture
  • Agriculture
  • Floriculture
  • Aquaculture

How the Bluelab Dostronic Solenoid Kit works

bluelab-solenoid-setup.jpg

Download a full size of the Bluelab Dosetronic Solenoid Kit diagram here.

Main Features
  • Simple, friendly user interface
  • Optional control functions - you can control one, two or all three parameters (pH, conductivity and temperature)
  • Individual High and Low alarm functions
  • Large easy to read displays with adjustable display brightness
  • All probes are removable / replaceable
  • Calibration “Quality” indicator for pH probe
  • Selectable values for conductivity and temperature
  • Selectable internal lockouts. E.g. Temperature high alarm can prevent nutrient dosing
  • Provision for External lockouts (both Normally Closed and Normally Open contact) E.g. a water flow switch can prevent all dosing action
  • Automatic safety lockouts built in – E.g. Prevents dosing of pH and nutrient solution if a fault is detected

Other Features
  • Probe lead lengths are 2m/6ft
  • Able to calibrate conductivity but not required
  • Splash proof
  • International power supply for controller
  • Monitors and controls pH (raise OR lower)
  • Monitors and controls conductivity (raise only)
  • Monitors and controls temperature - either mains connected heating OR cooling equipment
  • Settings retained if power failure occurs
  • Can be placed into Monitor mode only with alarms enabled / disabled
  • Includes visual alarm. Audio alarm available if alarm box is purchased.
  • Able to connect an external alarm device
  • Hysteresis: Settable on Temperature only – E.g. prevents damage to temperature from rapid on and off switching
  • Adjustable compressor lockout – E.g. prevents damage to equipment by ensuring an adequate start up delay
  • OPTION: ATC pH Probe, Alarm Box

2 year Bluelab Guarantee

bluelab-guarantee-2year-web.jpg

The Bluelab Dosetronic® comes with a free 2 year repair or replacement guarantee for your added benefit.

bluelab-guarantee-12mth-web.jpg

Solenoids come with a free 12 month year repair or replacement guarantee for your added benefit.

 

Product Information
Bluelab Dosetronic® Solenoid Kit Information Brochure
Bluelab Dosetroinc Solenoid Kit Instruction Manual
Bluelab Dosetronic technical specifications
(Note: These documents may take a few moments to download)

Product Care Information  

Refer to instruction manual above

Accessories
Bluelab pH Probe Dosetronic Sample Board
Bluelab Cleaning Kits pH Probe Storage Cap
Bluelab Temperature Probe Alarm and external lockout box
Bluelab Dosetronic Conductivity Probe Bluelab Dosetronic Solenoid Cable Pack
Bluelab pH Probe with ATC  

Need more information?
If you are unable to find what you are looking for, please email us  We are always here to help!
Take advantage of FREE SHIPPING for all products!
bluelab-free-shipping.jpg


Power type required  EUR
 NZ/AUS
 UK
 US/CA
Qty

You might also be interested in ...

Bluelab Guardian Monitor

Bluelab Guardian Monitor

PPM monitor -Monitoring pH, Conductivity and Temperature so you don't have to.

US$345.00
excl GST
New Item
Qty.
Bluelab Combo Meter

Bluelab Combo Meter

pH, Conductivity and Temperature, it's got you covered!

US$279.00
excl GST
Qty.
Replacement Dosetronic pH Probe with ATC

Replacement Dosetronic pH Probe with ATC

Replacement Dosetronic pH Probe with ATC (Automatic Temperature Compensation).

US$167.00
excl GST
Qty.
Bluelab Alarm and External Lockout Box

Bluelab Alarm and External Lockout Box

Bluelab Alarm and External Lockout Box

US$48.00
excl GST
Qty.
logo-100-percent-pure-new-zealandlogo-export-new-zealandlogo-hydro-for-hunger